Products & Services 
Videoconferencing Recommended Settings
Select System Info
Printable VersionSelect User Set-up
| Answer Point to Point | Yes |
| Auto Answer Multipoint | No |
| Mute Auto Answer Calls | Check |
| PIP | Auto |
| Far Control of Near Camera | Check |
| Backlight Compensation | Check |
| Allow Remote Monitoring | Blank |
| Meeting Password | Blank |
| Far Site Name Display Time | 15 |
| Multipoint Mode | Auto |
Select Admin Set-up
Select General
| Language | English (US) |
| Country | United States |
| System Name | The name you want displayed to the far end |
| Answer Point to Point | Yes |
| Auto Answer Multipoint | No |
| Allow Dialing | Check |
| Display my IP And ISDN Information | Check |
| Maximum Time Call | 480 |
| Allow User Set-up | Check |
| Allow Address Book Changes | Check |
| Keypad Audio Confirmation | Blank |
| Display Speed Dial | Check |
| Screen Saver Wait Time | 3 |
Select Admin Set-up
Select Lan/H.323
Select QoS
| Type of Service(ToS) Field | IP Prec. |
| Type of Service (ToS) Value | |
| Video | 4 |
| Audio | 4 |
| Far End Camera Control | 4 |
| Dynamic Bandwidth | Check |
| Enable PVEC | Check |
(Note: if your system is already working, it may not necessary
to change these settings)
RINET recommends that you set an Admin password, contact Pam Christman (pchristman@staff.ri.net or 295-9200 x5803) for assistance.
For all other settings, consult your Polycom User Guide or www.polycom.com (select support, select how-to, select video how to).
